SIDING REPAIR
Cracked, dented, warped, or rotting siding? We repair all siding types — fast, affordable, and backed by our workmanship guarantee.
Siding Repair in Denver, Colorado
Your siding is your home's first line of defense against Colorado's harsh weather — extreme UV, hail, wind, and rapid temperature swings that cycle between 70°F and 20°F in a single day. When siding is damaged, moisture gets behind the panels and silently destroys your home's sheathing, insulation, and structural framing.
At The Roofing and Siding Company, we repair all siding types — James Hardie fiber cement, vinyl, aluminum, engineered wood, and natural wood. Whether it's hail damage, storm impact, age-related cracking, or rot, we fix it right and restore your home's protection and curb appeal.
Common Siding Problems We Fix
- Hail & Storm Damage: Dented, cracked, or shattered siding panels from Colorado's frequent hailstorms. We handle insurance claims and replace damaged sections with matching materials.
- Cracking & Splitting: Temperature cycling causes siding to expand and contract, eventually leading to cracks — especially in vinyl and older fiber cement. We replace cracked panels before moisture gets behind them.
- Rot & Moisture Damage: Wood and engineered wood siding can rot when moisture penetrates through cracks, failed caulking, or poor flashing. We remove rotted sections, inspect the sheathing behind, and install new panels.
- Warping & Buckling: Improper installation, heat, or moisture causes siding panels to warp or buckle. We remove the affected sections and reinstall properly with room for thermal expansion.
- Loose or Missing Panels: Wind can loosen or tear off siding panels, exposing the house wrap and sheathing underneath. We re-secure or replace panels and check for water damage behind them.
- Failed Caulking & Seams: Caulking around windows, doors, trim, and panel seams deteriorates over time, creating water entry points. We remove old caulking and apply proper sealant.
Siding Types We Repair
- James Hardie Fiber Cement: Cracked planks, chipped edges, failed paint, and impact damage. As a James Hardie Preferred Contractor, we repair and replace with factory-primed, color-matched planks.
- Vinyl Siding: Cracked, dented, or melted panels. We match the profile and color of your existing vinyl for seamless repairs.
- Aluminum Siding: Dented or oxidized panels. We can replace individual panels or sections.
- Engineered Wood: Swelling, delamination, and moisture damage. We replace failed sections and address the moisture source.
- Natural Wood: Rot, splitting, and insect damage. We replace damaged boards and treat surrounding areas to prevent recurrence.
Our Siding Repair Process
- Free Inspection: We examine all sides of your home, checking for visible damage, moisture intrusion signs, and areas at risk.
- Behind-the-Panel Check: When panels are removed, we inspect the house wrap, sheathing, and insulation for hidden moisture damage or rot.
- Material Matching: We source panels that match your existing siding in profile, texture, and color for a seamless repair.
- Professional Installation: We install replacement panels to manufacturer specifications with proper clearances, fastening, and sealing.
- Final Inspection: We verify the repair is watertight, visually consistent, and built to last.
Siding Repair Across the Denver Metro
We repair siding throughout the Denver metro area. Whether it's storm damage or age-related wear, we'll restore your home's protection and curb appeal.
Siding Repair FAQ
Can damaged siding be repaired or does it need full replacement?
It depends on the extent and type of damage. Localized damage — a few cracked panels, a section of rot, or storm-dented boards — can often be repaired by replacing just the affected panels. Widespread damage, severe moisture penetration behind the siding, or aged siding that's failing across the entire house typically warrants full replacement. We'll give you an honest recommendation during your free inspection.
How much does siding repair cost in Denver?
Small repairs (replacing a few damaged panels) typically cost $300–$1,500. Larger repairs involving moisture damage, structural repair behind the siding, or significant storm damage can range from $2,000–$8,000+. We provide detailed estimates after inspection — no surprises.
Can you match my existing siding for a repair?
In most cases, yes. For vinyl and fiber cement siding, we can match the profile, texture, and color of your existing panels. However, if your siding is older or has faded significantly, a perfect color match may not be possible. In those cases, we can replace an entire wall section for a consistent appearance, or discuss full replacement options.
Does insurance cover siding repair?
Storm damage (hail, wind, fallen debris) is typically covered by homeowner's insurance. We work with insurance companies regularly and will document all damage, meet with your adjuster, and handle the claims process. Normal wear and tear or maintenance-related damage is generally not covered.
What happens if I ignore damaged siding?
Damaged siding allows moisture behind the panels, where it causes problems you can't see — rotting sheathing, mold growth, insulation damage, and even structural wood decay. What starts as a cosmetic issue becomes a major structural and health concern. The cost of repair escalates dramatically the longer moisture has been getting in.
Damaged Siding? Don't Wait.
FREE SIDING INSPECTION
James Hardie Preferred. GAF Certified. 5-Star Rated.
Paul T.
“Meticulous, detail oriented, and perfectly on-time. One of the best contractors we've worked with!”
Siding Damaged?
Free inspection. Honest advice. Expert repair.